Tag Archives: Resetter Canon

After posting software resetter for canon pixma ip 1980, now i will give you video Tutorial How To Reset Canon Pixma IP 1980 :

Source : youtube.com

How To Reset Canon Pixma IP 1980 :

  1. Make sure all files from Read Only .
  2. Run GeneralTool.exe GeneralTool IP 1980
  3. Select the USB port on your Canon printer IP 1980.
  4. Click the Lock Release
  5. Select (tick ) EEPROM CLEAR, Cleaning.
  6. Provide blank paper to print . Then click the Test Pattern 1
  7. Finish your IP 1980 printer back to normal .

You must download resetter, please visit :

Download Resetter Canon Pixma iP1980:  DownloadDriveresetter.com was distribute tools for reset Canon iP1980, if you want know how to reset canon ip 1980 please follow this intruction, if you want more detail you can see on video intruction.

Download Resetter Canon Pixma iP1980

Download Resetter Canon Pixma iP1980

How to reset Canon Pixma iP1980 :

  1. Turn on the printer Canon iP1900
  2. Please Press and then Press hold the Resume button for 2 minutes .
  3. Release the Resume button .
  4. The printer will return to normal .
  5. If still not normal as well , as to do the manual reset and reset Sofware
  6. Step Manual Reset
  7. Printer power cord plugs in the off state
  8. Please Press and then Press hold the power button with your index finger and then input power cable
  9. The power button is still on hold , then push the middle finger andah resume button twice .
  10. Remove the power button
  11. The printer is not blinking
  12. At this stage you have finished doing the Manual Reset
  13. Permanent order please use the Reset Sofware .
Resetter Canon Pixma iP1980

Resetter Canon Pixma iP1980

Perform his steps as follows:

  1. Buddy Make sure all files from Read Only .
  2. Run GeneralTool.exe GeneralTool iP1900
  3. Select the USB port on your Canon printer iP1900 .
  4. Click the Lock Release
  5. Select (tick ) EEPROM CLEAR
  6. Provide blank paper to print . Then click the Test Pattern 1
  7. Finish your IP1900 printer back to normal .
  8. A few of this article may be useful for you 🙂

Video How To Reset Canon Pixma IP 1980 :


How To Reset Canon Pixma iP1980

Download Resetter Canon Pixma IP 1980 :

canon resetter service tool v3400 is software for reset  all iPxxxx series, iX series, MGxxxx series, MP series printers. Service Tool can make service adjustments and Reset procedures with the Ink Absorber Counter. To reset waste ink absorber counters you have to use Service Tool V2000 under Windows XP or under other Windows OS in the compatibility mode:

canon resetter service tool v3400

canon resetter service tool v3400

canon resetter service tool v3400 2

canon resetter service tool v3400 2

canon resetter service tool v3400 3

canon resetter service tool v3400 3

  1. DOWNLOAD Service Tool V3400 for Canon iP, MG series
  2. Unzip downloaded file by WinZip or Winrar.
  3. Set the printer in Service Mode:
    • power OFF the printer by Power button. Dont disconnect power cable
    • connect the printer by USB cable to the PC.
    • press and hold Resume button (red triangle in the red circle) and press Power button
    • hold both buttons until power on indicator will light then release Resume button (dont release Power button) and press Resume button 5 times
    • release all buttons – the printer will blink few times with green light and will then light green constantly. You have put the printer in Service Mode now and you can now run the Service Tool. (If the printer is still blinking by green – you have some other errors in printer and you have to fix them first, because the Service Tool will not work if the printer is not put in service mode – green light is constant)
  4. Run the Service Tool V3400.exe program.
  5. Select the connected USB port number from USB PORT
  6. In the Ink Absorber Counter section of the Service Tool, select MAIN from the Absorber pull-down menu.
  7. From the Counter Value (%) pull-down menu, select the value (in 10% increments) which is the closest to the actual counter value confirmed before replacement of the logic board, and click SET. Print EEPROM information to confirm that the value is properly set to the EEPROM.

How to Reset Canon Printer MP258 with Software Cannon Resetter For easy reset your canon pinter. Just Download Software and follow tutorial :

How to Reset Canon Printer MP258

How to Reset Canon Printer MP258

How to Reset Canon MP258 :

  1. Cannon MP258 All Phase Making Service Setting The E05 Mistake, 5B00 and P07
  2.  When the Canon MP258 printer is switched on, turn the inkjet printer off by pressing the ability button. If the MP258 is switched off, make sure the printer’s cord is attached towards the electrical outlet.
  3.  two Use your fingertips to press the actual STOP / TOTALLY RESET and POWER switch Canon MP258 inkjet printer, 2 to contain the key.
  4.  Remove the hand pressing the CEASE / RESET ( energy button still pressed ) then pressing the back again button STOP / RESET twice and release the two buttons simultaneously.
  5.  If you’re correct in doing the above mentioned points, led in conjunction with the printer is going to be blinking on the actual Canon MP258 digesting you, wait for this to finish using the LED sign about the printer labeled using the number 0.
  6.  Simultaneously, your computer will detect a brand new device, just ignore it since it ‘s a sign from the Canon MP258 you will be ready to reset this match my article entitled How you can Reset Canon MP258 + Reseternya.

Using Software Reset Canon MP258 Resetter :

  1. Download resetter canon MP258.
  2. Draw out and run the program service tool inkjet printer Canon MP258 is actually capable or even fix the E05 Mistake, Error Error 5B00 as well as P07
  3.  Put some document to print throughout the reset canon MP258
  4.  Click on the PLAY button that’s on the software program service tools MP258, once you click on, the printer images a sheet of paper using the words ” Deb = 000. 0 inch
  5.  Print First Totally reset Canon MP258 Canon MP258
  6.  Then click on the Clear EEPROM, continue by clicking the actual button EEPROM
  7.  When it’s been clicked the EEPROM then your printer will carry out again printing just one sheet of document bearing the MP258 reset the outcomes as shown beneath.
  8.  Results Reset Cannon MP258 Perform How you can Reset Canon MP258 Mistake E05, 5B00, P07
  9.  Switch off and turn in your printer. Setelag How you can Reset Canon MP258 carry out correctly, your printer must have returned to normal and you will use to printing

How to Reset Counter Canon iP 2770 With Service tool v3400. Before Reset Canon ip 2770, you must know about canon ip 2770. Printer Canon ip 2770 is actually newest all-in-one cannon printer that created for Home and little office user may print with maximal resolution as much as 4800×1200 dpi. This particular canon printer utilizing cartridge type PG-810, CL-811 (PG-810XL, CL811XL Optional) as well as using Hi-Speed HARDWARE 2. 0 interface to attached to computer. Canon Pixma iP 2770 assistance for Windows 2000 (SP4 only), Earn XP, Vista and Windows 7 as well as support for MACINTOSH OS

How you can Reset Canon iP2770 Error 5B00:
1. The actual printer is upon
2. Press and contain the RESUME button after that press and contain the POWER button 5 times each after which release both control keys simultaneously (Led may blink briefly after that will flash GREEN)
3. The computer will detect a brand new device, just cancel…..
four. This shows the actual iP2770 printer is within a state associated with SERVICE MODE and prepared to be reset.

 How to Reset Counter Canon ip2770 Printer


How to Reset Counter Canon ip2770 Printer

Operate Resetter iP2770 this:
1. File Exctract Resetter iP2770 ( Service tool v3400).
two. Prepare some paper within the printer (to print during the time of the reset process).
3. Run this program Resetter iP2770
four. Click the “PLAY”, then your printer will continue, then iP2770 may print one page using the words “D = 000. 0″
5. Click on the “Clear EEPROM”.
6. After that click “EEPROM”, and also the printer will print the outcomes Resetter iP2770
7. Switch off the printer by pressing the ability button and transform it on again.